5.0
Google Rating
1500+
Railings Installed
100%
Licensed & Bonded
About
Fencing Built for Newberg and Wine Country
Newberg properties run long. A boundary here might follow a vineyard block, wrap a farmhouse yard, or mark the drive up to a hillside home, and the fence is usually seen against open land rather than a neighbor’s wall.
We fabricate custom fences in our own shop, install prefab horizontal slat systems, and build vertical fencing either way, finishing in the black, bronze, and wood tones that sit naturally in a wine country setting.
We build our Newberg metal fences together with Fences & Gates Pro, pairing their fencing experience with the fabrication and finishing we do in our own shop.
What We Build
Three Fence Builds for Newberg Properties
Each build serves a different Newberg property, and together they cover the valley.
Custom Fabricated Fences
For a long vineyard boundary, a drive gate that anchors an entry, or a design that has to sit with reclaimed wood and board-formed concrete, custom fabrication in steel or aluminum gives us full control of height, spacing, and detail.
Prefab Horizontal Slat Fences
Prefab horizontal slat panels suit the newer Newberg neighborhoods and the yards immediately around a farmhouse: factory-consistent, quicker to install, and clean enough for a modern elevation.
Vertical Fences, Custom or Prefab
The upright profile that suits the older homes downtown and around George Fox, fabricated to an exact line where the property calls for it, or installed as quality prefab vertical panels.
Slat Materials
Slat Materials: Aluminum and Steel, or Composite
The slat sets the character of the fence, so we offer it in metal or composite.
Aluminum and Steel Slat Fences
Aluminum keeps a slat fence rust-free and light, which helps on the long runs common out here. Steel steps in where strength or a heavier profile is wanted, and it carries the ornamental work a farmhouse or winery entry often asks for. Powder-coats run from matte black to bronze and wood tones.
Composite Slat Fences
Composite slats pair a metal frame with wood-look boards that never need staining, which sits well beside the reclaimed wood common in wine country builds without adding another thing to maintain.
Privacy Levels
Privacy From Full Screening to Open and Architectural
Privacy is a dial we set per property rather than a fixed product.
Privacy
Tight slat spacing closes off a courtyard, pool, or tasting terrace completely, usually on the one side of a property that needs it.
Semi Privacy
A measured gap screens the view from the road while keeping the yard bright and the breeze moving through, which suits a farmhouse frontage.
Open & Architectural
Wider spacing keeps the vineyard rows and the valley fully in view, reading as a property line rather than a wall across the outlook. On most Newberg land this is the setting that fits.
Laser Cut Panels
Custom Laser Cut Panels for Newberg Fences
For a property that wants a signature element, we laser cut custom metal panels, so a Newberg fence or drive gate can carry a bespoke screen designed for the setting. Cut in our own shop, they integrate into both custom fabricated fences and prefab runs, which suits a winery entry or a hillside home that wants one memorable detail.
We deliver this fencing together with Fences & Gates Pro, pairing their fence experience with our fabrication and laser cutting.
Neighborhoods
Where We Fence in Newberg and the Valley
From downtown and the George Fox blocks out to Chehalem Mountain, Ribbon Ridge, and the Dundee Hills, we build each fence to the property, the land, and the architecture.
- Downtown Newberg
- Springbrook
- Chehalem Glenn
- Rex Hill
- Chehalem Mountain
- Dundee
- George Fox area
- Crestview Crossing
- Allison area
- North Valley
- Ribbon Ridge
- Dundee Hills
Communities and New Builds
Working With Newberg Communities and New Builds
Some Newberg neighborhoods keep written standards for fence height, style, and material, and a few review exterior changes before work starts. We prepare the drawings and samples the association asks for so approval is straightforward. Rural and vineyard properties usually have more latitude, and we design to the land instead.
On new construction and winery projects we coordinate with your builder or architect so the fence, gates, and any metalwork arrive as part of the finished design.
Get a Free Quote
Showroom
Visit Our Showroom in Kent
Our Kent showroom is a short drive south of Bellevue. Come see modern, ornamental, glass, and cable railings in person, compare metal finishes and top-rail options, and look over completed projects before you decide on a direction for your home.
Customer Reviews for Custom Railings WA
See What Our Customers Are Saying
Portland's Leading Custom Metal & Glass Works Contractor
Make An Appointment Today With Our Online Form
How It Works
From First Call to Finished Railing
We keep the process simple. Here is what an metal fences project in Newberg looks like from start to finish.
1
Request a Quote
Tell us about your project and share photos, dimensions, or inspiration if available.
2
Consultation
We review your goals, style preferences, layout, and material options in detail.
3
Site Measurement
Our team visits the site to take precise measurements.
4
Design
We create custom railing drawings for your space, style, and requirements.
5
Fabrication
Your railing is fabricated using high-quality materials with close attention to fit and finish.
6
Installation
We install the railing carefully on site and make sure every detail is completed properly.