5.0
Google Rating
1500+
Railings Installed
100%
Licensed & Bonded
About
Fencing Built for Camas Homes
Camas builds modern and builds on slopes, which is a demanding combination for a fence. The line has to stay true as the ground steps away, the reveals have to be even, and the finish has to sit with the stone and siding on a newer custom home.
We fabricate custom fences in our own shop, install prefab horizontal slat systems, and offer vertical fencing custom or prefab, matching the powder-coat to your home instead of to a catalog swatch.
We build our Camas metal fences together with Fences & Gates Pro, pairing their fencing experience with the fabrication and finishing we do in our own shop.
What We Build
Three Fence Builds for Camas Properties
Each build answers a different Camas property, and together they cover the town.
Custom Fabricated Fences
For a Prune Hill lot that steps down toward the view, or a design that has to echo a newer custom home, fabricating in steel or aluminum gives us full control of height, spacing, and how the line follows the grade.
Prefab Horizontal Slat Fences
Prefab horizontal slat panels are the modern Camas favorite: consistent factory panels, quicker to install, and clean enough to sit beside the glass and stone common on the newer builds.
Vertical Fences, Custom or Prefab
The upright profile that suits the older blocks near downtown and Crown Park, fabricated to an exact line where the yard demands it, or installed as quality prefab vertical panels.
Slat Materials
Slat Materials: Aluminum and Steel, or Composite
The slat does most of the visual work on a fence, and it comes in metal or composite.
Aluminum and Steel Slat Fences
Aluminum keeps a slat fence rust-free and low-maintenance through wet Northwest winters. Steel takes over where strength or a heavier profile is wanted. Powder-coats run from matte black through bronze and wood tones.
Composite Slat Fences
Composite slats set wood-look boards into a metal frame, warming up a contemporary Camas elevation without the staining cedar would ask for every couple of years.
Privacy Levels
Privacy From Full Screening to Open and Architectural
Privacy comes in degrees, and we settle the degree with you before anything is built.
Privacy
Tight slat spacing closes off a back yard or hot tub area completely, which comes up often in the newer Camas neighborhoods where houses sit fairly close together.
Semi Privacy
An even gap screens the direct view from the street or a neighbor’s upper floor while keeping the yard bright and the air moving.
Open & Architectural
Open spacing lets the fence define an edge without walling anything off, and on a view lot it keeps the Columbia or the valley in play instead of cutting it off.
Laser Cut Panels
Custom Laser Cut Panels for Camas Fences
When a Camas project wants something past a standard picket or slat, we laser cut custom metal panels, so a fence can carry a geometric screen or privacy insert drawn for that property. Cut in our own shop, they work into both custom fabricated fences and prefab runs, giving a modern home a one-off detail on an efficient base.
We deliver this fencing together with Fences & Gates Pro, pairing their fence experience with our fabrication and laser cutting.
Neighborhoods
Where We Fence in Camas
From Prune Hill and Lacamas Shores to Camas Meadows, Dawson Ridge, and the older blocks downtown, we build each fence to the home, the grade, and the neighborhood.
- Prune Hill
- North Shore
- Dawson Ridge
- Grass Valley
- Downtown Camas
- Forest Home
- Lacamas Shores
- Camas Meadows
- Deer Creek
- Green Mountain
- Crown Park
- Parker's Landing
Communities and New Builds
Working With Camas Associations and New Builds
Many of the newer Camas neighborhoods keep written standards for fence height, style, and material, and some review every exterior change. We prepare the drawings and samples the association asks for so approval is straightforward.
On new construction we get involved while the house is going up, matching the fence color and profile to the exterior as it is being specified.
Get a Free Quote
Showroom
Visit Our Showroom in Kent
Our Kent showroom is a short drive south of Bellevue. Come see modern, ornamental, glass, and cable railings in person, compare metal finishes and top-rail options, and look over completed projects before you decide on a direction for your home.
Customer Reviews for Custom Railings WA
See What Our Customers Are Saying
Portland's Leading Custom Metal & Glass Works Contractor
Make An Appointment Today With Our Online Form
How It Works
From First Call to Finished Railing
We keep the process simple. Here is what an metal fences project in Camas looks like from start to finish.
1
Request a Quote
Tell us about your project and share photos, dimensions, or inspiration if available.
2
Consultation
We review your goals, style preferences, layout, and material options in detail.
3
Site Measurement
Our team visits the site to take precise measurements.
4
Design
We create custom railing drawings for your space, style, and requirements.
5
Fabrication
Your railing is fabricated using high-quality materials with close attention to fit and finish.
6
Installation
We install the railing carefully on site and make sure every detail is completed properly.